View single post by Wayne Taylor
 Posted: Fri Jun 26th, 2020 03:55 pm
PMQuoteReplyFull Topic
Wayne Taylor



Joined: Sun May 27th, 2018
Location:  
Posts: 26
Status: 
Offline
 
I recently acquired a Precision Scale HOn3 Goose #5 (Pierce Arrow Freight),
at a reasonable price due to condition. 

The goose is unassembled,
as the previous owner had apparently been trying to replace the burned out bulbs. 

I ordered some nano LED lights, but have 2 problems:
1)  They are rated at 1.5 Volts.  Any current over that will destroy them.
2)  All the factory wiring has been removed, and leads cut at the motor terminals.

Anyone out there know how this was originally wired? 

There is an electrical post near the motor, attached to the frame,
where the current from one rail was probably picked up,
but all wiring is missing.





Close Window