Has anyone got a cheap and simple good looking trunk for aspen trees? The leaf area I've worked out good but I would like something a little more substantial for the trunks. Most of the stuff tried works out too fragile. The stuff from the craft stores seems too small to me when up against On30 stuff. There are places in Colorado where I have seen aspens that are really tall and have a huge diameter. Any help will be really appreciated. All the stuff tried only has yielded trunks about a scale 12".
____________________ Clif Korlaske
OWNER,OPERATOR,CHIEF COOK,& BOTTLE WASHER
"How old will you be before your as stupid as you think I am?"
the method i used was two caspia fern branches taped together with 1/8 in masking tape. painted white with a few black marks. the leaves i made by dying foam and chopping it up in a blender. dont use the wifes good one. i got one at goodwill for a buck. spray on diluted white glue and water. i then rolled the tree around in the foam. i dont think it looks half bad
Last edited on Tue Jan 18th, 2011 11:18 pm by pibull63
____________________ "come ride the little train that is rollin' down the track to the junction....."
Don't know if this will help you are not. !! But I found some stuff in the floral department at "MICHAEL'S" that make great Aspen Trees. You can get about 5 to 6 really tall trees from the bushel. But the trunks are not that thick !! But you could use modeling clay for that. The bushel comes in white or light green. I spray paint mine golden yellow with a light grey trunk and black dots all over the trunk and limbs.
____________________ Ronnie D.
Owner and Builder of The R&P Lumber Company.
I also Build and sell "On30 Logging and Detail Parts on Ebay.