View single post by Tramcar Trev
 Posted: Mon Sep 7th, 2015 11:22 am
PMQuoteReplyFull Topic
Tramcar Trev



Joined: Sat Mar 16th, 2013
Location: Gordon ACT, Australia
Posts: 398
Status: 
Offline
You can adjust the width of cut down to .25mm and the depth from 0 to 5mm depending on what you are cutting, it cuts lines with incredible accuracy, and to make the recessed frames around window sashes etc it will reduce the thickness down by whatever you choose, also will run a very accurate neat groove if you wish to insert a strip above the general plane. We did try it to make fake timber grain but it will do it but it looks fake.... it will reproduce pictures in mono... As there is no blade there is no distortion, seems to cut strips down to 1mm wide with no trouble, Compatible with heaps of file types.... The laser tube is replaceable they do not last for ever...
Occre have been using a similar machine to make their kits..
http://www.occre.com/model-tram/san-francisco.html#!prettyPhoto

Last edited on Mon Sep 7th, 2015 11:25 am by Tramcar Trev



____________________
There once was a man who said Damn!!
I perceive with regret that I am
A creature that moves
in predestinate groves
I'm not a Bus, I'm a tram
Close Window