View single post by B&O GLENNWOOD
 Posted: Wed Aug 14th, 2013 06:59 pm
PMQuoteReplyFull Topic
B&O GLENNWOOD



Joined: Wed Aug 25th, 2010
Location: Pittsburgh, Pennsylvania USA
Posts: 92
Status: 
Offline
Not to discredit Woodie my experience with home made inkjet decals the lighter colors like yellow do not show up when applied to a model when printed on clear decal film the colors are to opaque my suggestion is to combine both methods print your signage on white decal film this will give the same results as printing on paper then use it in the same manner as the paper method If you want to age and weather the decal scuff with steel wool or a kitchen greenie pad after it is applied After the decal is made you will have to seal the inks with a clear coat before use I hope this helps and dont be afraid to contact me if you need more information Paul

Close Window