View single post by Mikel Parker
 Posted: Tue Mar 22nd, 2022 06:57 pm
PMQuoteReplyFull Topic
Mikel Parker

Joined: Mon Oct 1st, 2018
Location: Portland, Oregon USA
Posts: 281

The next step, is on to the flanger house,
so I cut out the sides, back and front, from the stained siding piece.

I traced the template onto tracing paper, and taped it on the siding,
cut out each section and windows, cautious not to move the paper.

Sometimes I use transfer paper, but I wanted to
cut these out from the face, to get cleaner cuts,
since window areas are exposed in several of the openings
(the way this kit has front windows set)
and the transfer paper is blue (like carbon paper only lighter).

Then door blanks are cut at this time,
though for some reason front skinny doors are tall (?)

Attachment: RGS 02 8.jpeg (Downloaded 29 times)

Close Window